Optimization of processing condition for deposition of DLC using FIB-CVD method

Naomichi Sakamoto; Yasuo Kogo; Takahiro Yagi; Takuya Yasuno; Jun Taniguchi; Iwao Miyamoto

Optimization of processing condition for deposition of DLC using FIB-CVD method

Naomichi Sakamoto, Yasuo Kogo, Takahiro Yagi, Takuya Yasuno, Jun Taniguchi, Iwao Miyamoto

研究成果: Paper › 査読

抄録

The processing conditions of DLC using the FIB-CVD method were examined in detail and were optimized. Microstructures and mechanical properties of DLC were also investigated. The deposition experiments with changing processing conditions indicated that the rate-determining steps of the deposition rate were varied by the probe current and heating temperature of phenanthrene. HRTEM and diffraction images showed that the DLC had amorphous structures. Young's modulus and Vickers hardness were in the range of 110-140 GPa and 1100-1400 HV, respectively. These mechanical properties were obtained similarly even though the deposition conditions were changed in our study.

本文言語	English
ページ	811-816
ページ数	6
出版ステータス	Published - 1 12月 2005
イベント	3rd International Conference on Leading Edge Manufacturing in 21st Century, LEM 2005 - Nagoya, Japan 継続期間: 19 10月 2005 → 22 10月 2005

Conference

Conference	3rd International Conference on Leading Edge Manufacturing in 21st Century, LEM 2005
国/地域	Japan
City	Nagoya
Period	19/10/05 → 22/10/05

他のファイルとリンク

Link to publication in Scopus

引用スタイル

@conference{e5d40d674c2b4066959163cbcaf87c13,

title = "Optimization of processing condition for deposition of DLC using FIB-CVD method",

abstract = "The processing conditions of DLC using the FIB-CVD method were examined in detail and were optimized. Microstructures and mechanical properties of DLC were also investigated. The deposition experiments with changing processing conditions indicated that the rate-determining steps of the deposition rate were varied by the probe current and heating temperature of phenanthrene. HRTEM and diffraction images showed that the DLC had amorphous structures. Young's modulus and Vickers hardness were in the range of 110-140 GPa and 1100-1400 HV, respectively. These mechanical properties were obtained similarly even though the deposition conditions were changed in our study.",

keywords = "Chemical vapor deposition, Diamond-like carbon, Focused ion-beam, High-resolution transmission electron microscopy, Mechanical properties",

author = "Naomichi Sakamoto and Yasuo Kogo and Takahiro Yagi and Takuya Yasuno and Jun Taniguchi and Iwao Miyamoto",

year = "2005",

month = dec,

day = "1",

language = "English",

pages = "811--816",

note = "3rd International Conference on Leading Edge Manufacturing in 21st Century, LEM 2005 ; Conference date: 19-10-2005 Through 22-10-2005",

}

TY - CONF

T1 - Optimization of processing condition for deposition of DLC using FIB-CVD method

AU - Sakamoto, Naomichi

AU - Kogo, Yasuo

AU - Yagi, Takahiro

AU - Yasuno, Takuya

AU - Taniguchi, Jun

AU - Miyamoto, Iwao

PY - 2005/12/1

Y1 - 2005/12/1

N2 - The processing conditions of DLC using the FIB-CVD method were examined in detail and were optimized. Microstructures and mechanical properties of DLC were also investigated. The deposition experiments with changing processing conditions indicated that the rate-determining steps of the deposition rate were varied by the probe current and heating temperature of phenanthrene. HRTEM and diffraction images showed that the DLC had amorphous structures. Young's modulus and Vickers hardness were in the range of 110-140 GPa and 1100-1400 HV, respectively. These mechanical properties were obtained similarly even though the deposition conditions were changed in our study.

AB - The processing conditions of DLC using the FIB-CVD method were examined in detail and were optimized. Microstructures and mechanical properties of DLC were also investigated. The deposition experiments with changing processing conditions indicated that the rate-determining steps of the deposition rate were varied by the probe current and heating temperature of phenanthrene. HRTEM and diffraction images showed that the DLC had amorphous structures. Young's modulus and Vickers hardness were in the range of 110-140 GPa and 1100-1400 HV, respectively. These mechanical properties were obtained similarly even though the deposition conditions were changed in our study.

KW - Chemical vapor deposition

KW - Diamond-like carbon

KW - Focused ion-beam

KW - High-resolution transmission electron microscopy

KW - Mechanical properties

UR - http://www.scopus.com/inward/record.url?scp=84883700984&partnerID=8YFLogxK

M3 - Paper

AN - SCOPUS:84883700984

SP - 811

EP - 816

T2 - 3rd International Conference on Leading Edge Manufacturing in 21st Century, LEM 2005

Y2 - 19 October 2005 through 22 October 2005

ER -

Optimization of processing condition for deposition of DLC using FIB-CVD method

抄録

Conference

他のファイルとリンク

フィンガープリント

引用スタイル