Study on low shrinkage concrete using blast-furnace slag fine powder blended cement

Haruki Momose; Kohsuke Ishizeki; Tetsushi Kanda; Kei Ichi Imamoto; Chizuru Kiyohara

doi:10.3130/aijt.23.369

Study on low shrinkage concrete using blast-furnace slag fine powder blended cement

Haruki Momose, Kohsuke Ishizeki, Tetsushi Kanda, Kei Ichi Imamoto, Chizuru Kiyohara

Department of Architecture

Research output: Contribution to journal › Article › peer-review

Abstract

The aim of this study is to experimentally investigate shrinkage properties of blast-furnace slag blended cement concrete (BLS-concrete, hereafter). For this purpose, restraint cracking tests for concrete were conducted at three ambient temperatures, 10 °C, 20 °C and 30 °C. The experiments showed that shrinkage cracking resistance of BLS-concrete was better than normal concrete regardless of ambient temperatures, andBLS-concrete had the same concrete strength development as normal concrete.

Original language	English
Pages (from-to)	369-373
Number of pages	5
Journal	AIJ Journal of Technology and Design
Volume	23
Issue number	54
DOIs	https://doi.org/10.3130/aijt.23.369
Publication status	Published - Jun 2017

Keywords

Blast-furnace slag cement
Concrete
Crack
Ground granulated blast-furnace slag
Shrinkage

Access to Document

10.3130/aijt.23.369

Cite this

@article{21becd214c69489e894b60f5bcea8ad2,

title = "Study on low shrinkage concrete using blast-furnace slag fine powder blended cement",

abstract = "The aim of this study is to experimentally investigate shrinkage properties of blast-furnace slag blended cement concrete (BLS-concrete, hereafter). For this purpose, restraint cracking tests for concrete were conducted at three ambient temperatures, 10 °C, 20 °C and 30 °C. The experiments showed that shrinkage cracking resistance of BLS-concrete was better than normal concrete regardless of ambient temperatures, andBLS-concrete had the same concrete strength development as normal concrete.",

keywords = "Blast-furnace slag cement, Concrete, Crack, Ground granulated blast-furnace slag, Shrinkage",

author = "Haruki Momose and Kohsuke Ishizeki and Tetsushi Kanda and Imamoto, {Kei Ichi} and Chizuru Kiyohara",

year = "2017",

month = jun,

doi = "10.3130/aijt.23.369",

language = "English",

volume = "23",

pages = "369--373",

journal = "AIJ Journal of Technology and Design",

issn = "1341-9463",

publisher = "Architectural Institute of Japan",

number = "54",

}

TY - JOUR

T1 - Study on low shrinkage concrete using blast-furnace slag fine powder blended cement

AU - Momose, Haruki

AU - Ishizeki, Kohsuke

AU - Kanda, Tetsushi

AU - Imamoto, Kei Ichi

AU - Kiyohara, Chizuru

PY - 2017/6

Y1 - 2017/6

N2 - The aim of this study is to experimentally investigate shrinkage properties of blast-furnace slag blended cement concrete (BLS-concrete, hereafter). For this purpose, restraint cracking tests for concrete were conducted at three ambient temperatures, 10 °C, 20 °C and 30 °C. The experiments showed that shrinkage cracking resistance of BLS-concrete was better than normal concrete regardless of ambient temperatures, andBLS-concrete had the same concrete strength development as normal concrete.

AB - The aim of this study is to experimentally investigate shrinkage properties of blast-furnace slag blended cement concrete (BLS-concrete, hereafter). For this purpose, restraint cracking tests for concrete were conducted at three ambient temperatures, 10 °C, 20 °C and 30 °C. The experiments showed that shrinkage cracking resistance of BLS-concrete was better than normal concrete regardless of ambient temperatures, andBLS-concrete had the same concrete strength development as normal concrete.

KW - Blast-furnace slag cement

KW - Concrete

KW - Crack

KW - Ground granulated blast-furnace slag

KW - Shrinkage

UR - http://www.scopus.com/inward/record.url?scp=85020948527&partnerID=8YFLogxK

U2 - 10.3130/aijt.23.369

DO - 10.3130/aijt.23.369

M3 - Article

AN - SCOPUS:85020948527

VL - 23

SP - 369

EP - 373

JO - AIJ Journal of Technology and Design

JF - AIJ Journal of Technology and Design

SN - 1341-9463

IS - 54

ER -

Study on low shrinkage concrete using blast-furnace slag fine powder blended cement

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this