Study on bent type of UWB antenna built in electronic equipment housing

Daisuke Momose; Takahiko Yamamoto; Koji Koshiji

doi:10.1109/ICEP.2014.6826793

Study on bent type of UWB antenna built in electronic equipment housing

Daisuke Momose
, Takahiko Yamamoto
, Koji Koshiji

Department of Electrical Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

In recent years, ultra wideband(UWB) communication has attracted attention as a high-speed and mass wireless communication technology over short distances. In UWB communication, antennas are required to have a low VSWR over the broadband and omni-directional radiation in the horizontal plane. In this study, toward building the antenna within electronic equipment housing, a simple bent-type UWB antenna fed by a microstrip line is proposed, and the characteristics of the antenna fed by an SMA coaxial connector are investigated. As a result, at UWB frequencies, the antenna (either with or without the SMA connector) operated correctly, with a VSWR less than 2.0 and with omni-directional radiation patterns in the horizontal plane.

Original language	English
Title of host publication	2014 International Conference on Electronics Packaging, ICEP 2014
Publisher	IEEE Computer Society
Pages	803-806
Number of pages	4
ISBN (Print)	9784904090107
DOIs	https://doi.org/10.1109/ICEP.2014.6826793
Publication status	Published - 1 Jan 2014
Event	2014 International Conference on Electronics Packaging, ICEP 2014 - Toyama, Japan Duration: 23 Apr 2014 → 25 Apr 2014

Publication series

Name	2014 International Conference on Electronics Packaging, ICEP 2014

Conference

Conference	2014 International Conference on Electronics Packaging, ICEP 2014
Country/Territory	Japan
City	Toyama
Period	23/04/14 → 25/04/14

Keywords

UWB
bending
electromagnetic field analysis
microstrip line

Access to Document

10.1109/ICEP.2014.6826793

Cite this

@inproceedings{5c5d776748b84c1e9ed587ee015c8b00,

title = "Study on bent type of UWB antenna built in electronic equipment housing",

abstract = "In recent years, ultra wideband(UWB) communication has attracted attention as a high-speed and mass wireless communication technology over short distances. In UWB communication, antennas are required to have a low VSWR over the broadband and omni-directional radiation in the horizontal plane. In this study, toward building the antenna within electronic equipment housing, a simple bent-type UWB antenna fed by a microstrip line is proposed, and the characteristics of the antenna fed by an SMA coaxial connector are investigated. As a result, at UWB frequencies, the antenna (either with or without the SMA connector) operated correctly, with a VSWR less than 2.0 and with omni-directional radiation patterns in the horizontal plane.",

keywords = "UWB, bending, electromagnetic field analysis, microstrip line",

author = "Daisuke Momose and Takahiko Yamamoto and Koji Koshiji",

year = "2014",

month = jan,

day = "1",

doi = "10.1109/ICEP.2014.6826793",

language = "English",

isbn = "9784904090107",

series = "2014 International Conference on Electronics Packaging, ICEP 2014",

publisher = "IEEE Computer Society",

pages = "803--806",

booktitle = "2014 International Conference on Electronics Packaging, ICEP 2014",

note = "2014 International Conference on Electronics Packaging, ICEP 2014 ; Conference date: 23-04-2014 Through 25-04-2014",

}

Momose, D, Yamamoto, T & Koshiji, K 2014, Study on bent type of UWB antenna built in electronic equipment housing. in 2014 International Conference on Electronics Packaging, ICEP 2014., 6826793, 2014 International Conference on Electronics Packaging, ICEP 2014, IEEE Computer Society, pp. 803-806, 2014 International Conference on Electronics Packaging, ICEP 2014, Toyama, Japan, 23/04/14. https://doi.org/10.1109/ICEP.2014.6826793

Study on bent type of UWB antenna built in electronic equipment housing. / Momose, Daisuke; Yamamoto, Takahiko; Koshiji, Koji.
2014 International Conference on Electronics Packaging, ICEP 2014. IEEE Computer Society, 2014. p. 803-806 6826793 (2014 International Conference on Electronics Packaging, ICEP 2014).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Study on bent type of UWB antenna built in electronic equipment housing

AU - Momose, Daisuke

AU - Yamamoto, Takahiko

AU - Koshiji, Koji

PY - 2014/1/1

Y1 - 2014/1/1

N2 - In recent years, ultra wideband(UWB) communication has attracted attention as a high-speed and mass wireless communication technology over short distances. In UWB communication, antennas are required to have a low VSWR over the broadband and omni-directional radiation in the horizontal plane. In this study, toward building the antenna within electronic equipment housing, a simple bent-type UWB antenna fed by a microstrip line is proposed, and the characteristics of the antenna fed by an SMA coaxial connector are investigated. As a result, at UWB frequencies, the antenna (either with or without the SMA connector) operated correctly, with a VSWR less than 2.0 and with omni-directional radiation patterns in the horizontal plane.

AB - In recent years, ultra wideband(UWB) communication has attracted attention as a high-speed and mass wireless communication technology over short distances. In UWB communication, antennas are required to have a low VSWR over the broadband and omni-directional radiation in the horizontal plane. In this study, toward building the antenna within electronic equipment housing, a simple bent-type UWB antenna fed by a microstrip line is proposed, and the characteristics of the antenna fed by an SMA coaxial connector are investigated. As a result, at UWB frequencies, the antenna (either with or without the SMA connector) operated correctly, with a VSWR less than 2.0 and with omni-directional radiation patterns in the horizontal plane.

KW - UWB

KW - bending

KW - electromagnetic field analysis

KW - microstrip line

UR - https://www.scopus.com/pages/publications/84903721015

U2 - 10.1109/ICEP.2014.6826793

DO - 10.1109/ICEP.2014.6826793

M3 - Conference contribution

AN - SCOPUS:84903721015

SN - 9784904090107

T3 - 2014 International Conference on Electronics Packaging, ICEP 2014

SP - 803

EP - 806

BT - 2014 International Conference on Electronics Packaging, ICEP 2014

PB - IEEE Computer Society

T2 - 2014 International Conference on Electronics Packaging, ICEP 2014

Y2 - 23 April 2014 through 25 April 2014

ER -

Study on bent type of UWB antenna built in electronic equipment housing

Abstract

Publication series

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this