Influence on smoke shield performance which the difference of the air supply systems causes in pressurized smoke control - method of easily measuring orthogonality ingredient of the wind velocity and static pressure under the dynamic pressure existence

Masashi Kishiue, Jun ichi Yamaguchi, Seiji Okinaga, Ken Matsuyama, Takayuki Matsushita

Research output: Contribution to journalArticle

Abstract

Measurement methods necessary to verify the hypothesis about smoke shielding performance proposed by the previous paper were suggested and the validity of these methods was inspected. These methods suggested in this paper were shown below with measurement items necessary for the verification of the hypothesis. 1) The wind velocity of the ingredient vertical for the upper surface and the perpendicular surface in the smoke shield opening It is measured with a directional anemometer which was installed so that direction of measurement became perpendicular to a measurement surface. 2) Static pressure difference The some newly developed devices were installed so that the angle to be formed of each device becomes less than 90 degrees and the maximum of measurement values was considered as the static pressure difference.

Original languageEnglish
Pages (from-to)31-38
Number of pages8
JournalBulletin of Japan Association for Fire Science and Engineering
Volume67
Issue number1
DOIs
Publication statusPublished - 1 Jan 2017

Fingerprint Dive into the research topics of 'Influence on smoke shield performance which the difference of the air supply systems causes in pressurized smoke control - method of easily measuring orthogonality ingredient of the wind velocity and static pressure under the dynamic pressure existence'. Together they form a unique fingerprint.

  • Cite this