An experimental result using RF energy harvesting circuit with dickson charge pump

Masaki Muramatsu, Hirotaka Koizumi

Research output: Chapter in Book/Report/Conference proceedingConference contribution

13 Citations (Scopus)

Abstract

This paper presents an RF (Radio Frequency) energy harvesting circuit with Dickson charge pump. The harvesting circuit harvested RF energy from a radio station which has 100 kW of a transmission power, at 954 kHz. The circuit is composed of a loop antenna, a 6-stage Dickson charge pump and an output capacitor as an energy storage element. The charge pump steps up the input voltage to the six times, and charges the output capacitor with the DC voltage. In the experiment, the output capacitor was charged to 520 mV by the RF harvesting circuit. The circuit harvested 60.2 μJ for half an hour.

Original languageEnglish
Title of host publication2010 IEEE International Conference on Sustainable Energy Technologies, ICSET 2010
DOIs
Publication statusPublished - 1 Dec 2010
Event2010 IEEE International Conference on Sustainable Energy Technologies, ICSET 2010 - Kandy, Sri Lanka
Duration: 6 Dec 20109 Dec 2010

Publication series

Name2010 IEEE International Conference on Sustainable Energy Technologies, ICSET 2010

Conference

Conference2010 IEEE International Conference on Sustainable Energy Technologies, ICSET 2010
CountrySri Lanka
CityKandy
Period6/12/109/12/10

    Fingerprint

Cite this

Muramatsu, M., & Koizumi, H. (2010). An experimental result using RF energy harvesting circuit with dickson charge pump. In 2010 IEEE International Conference on Sustainable Energy Technologies, ICSET 2010 [5684935] (2010 IEEE International Conference on Sustainable Energy Technologies, ICSET 2010). https://doi.org/10.1109/ICSET.2010.5684935