No photo of 保雄 向後

View Scopus Profile

Yasuo Kogo

Vice President

Calculated based on number of publications stored in Pure and citations from Scopus
1989 …2024

Research activity per year

Filter
Conference contribution

Search results

  • 2019

    Fabrication procedure for porous carbon material with three dimensionally networked structure

    Kaneda, Y., Inoue, R. & Kogo, Y., 2019, Ceramic Engineering and Science Proceedings. Kriven, W., Fahrenholtz, W. G., Wu, Y., Wang, J., Fey, T., Shurgart, K., Amoroso, J., Kirihara, S., Weber, W. J., Halbig, M., Shimamura, K. & Colombo, P. (eds.). 3 ed. American Ceramic Society, p. 77-86 10 p. (Ceramic Engineering and Science Proceedings; vol. 39, no. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    2 Citations (Scopus)
  • 2015

    The use of scallop shell powder as a method of extracting alkaline-earth metals

    Mihara, F., Takeuchi, K., Tamura, S., Idemoto, Y. & Kogo, Y., 2015, General Student Poster Session. Subramanian, V., Foley, M. P., Chaitanya, V., Khosla, A., Pharkya, P. & Sundaram, K. B. (eds.). 39 ed. Electrochemical Society Inc., p. 9-13 5 p. (ECS Transactions; vol. 66, no. 39).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • 2014

    Development of polyimide adhesive film and the application to high temperature sandwich panels

    Ayabe, S., Ogasawara, T., Ishida, Y. & Kogo, Y., 1 Jan 2014, 16th European Conference on Composite Materials, ECCM 2014. European Conference on Composite Materials, ECCM, (16th European Conference on Composite Materials, ECCM 2014).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Fabrication and characterization of ultra-lightweight ablator using porous carbon materials

    Sasaki, S., Ishikawa, M., Kogo, Y., Aoki, T., Ogasawara, T., Ishida, Y. & Yamada, T., 1 Jan 2014, 16th European Conference on Composite Materials, ECCM 2014. European Conference on Composite Materials, ECCM, (16th European Conference on Composite Materials, ECCM 2014).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    3 Citations (Scopus)

  • Preparation of porous core CFRP sandwich panel with low out-of-plane deformation

    Maeda, T., Ishikawa, M., Kogo, Y., Kamiya, T. & Utsunomiya, S., 2014, 16th European Conference on Composite Materials, ECCM 2014. European Conference on Composite Materials, ECCM, (16th European Conference on Composite Materials, ECCM 2014).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • 2013

    Fabrication of Mg2Si bulk by spark plasma sintering method with Mg2Si nano-powder

    Arai, K., Nishio, K., Miyamoto, N., Sunohara, K., Sakamoto, T., Hyodo, H., Hirayama, N., Kogo, Y. & Iida, T., 2013, Thermoelectric Materials Research and Device Development for Power Conversion and Refrigeration. p. 63-68 6 p. (Materials Research Society Symposium Proceedings; vol. 1490).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    2 Citations (Scopus)

  • Rare earth oxide containing filler for dental composite resin

    Uo, M., Nakajima, Y., Asakawa, Y., Wada, T., Hongo, T., Soga, K. & Kogo, Y., 2013, Bioceramics 24. 1 ed. Trans Tech Publications Ltd, p. 512-515 4 p. (Key Engineering Materials; vol. 529-530, no. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    1 Citation (Scopus)

  • Thermoelectrical properties of α phase and γ phase Na xCo2O4 ceramics prepared by spark plasma sintering method

    Mikami, N., Nishio, K., Arai, K., Sakamoto, T., Minowa, M., Nakamura, T., Hirayama, N., Kogo, Y. & Iida, T., 2013, Thermoelectric Materials Research and Device Development for Power Conversion and Refrigeration. p. 57-62 6 p. (Materials Research Society Symposium Proceedings; vol. 1490).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    2 Citations (Scopus)
  • 2012

    Effect of constituent ply thickness on nonlinear mechanical response in CFRP angle-ply laminates

    Ogihara, S., Nakatani, H. & Kogo, Y., 2012, 8th Asian-Australasian Conference on Composite Materials 2012, ACCM 2012 - Composites: Enabling Tomorrow's Industry Today. p. 650-655 6 p. (8th Asian-Australasian Conference on Composite Materials 2012, ACCM 2012 - Composites: Enabling Tomorrow's Industry Today; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Fabrication of large sintered pellets of Sb-doped N-type Mg2Si using a plasma activated sintering method

    Hayatsu, Y., Iida, T., Sakamoto, T., Kurosaki, S., Nishio, K., Kogo, Y. & Takanashi, Y., 2012, 9th European Conference on Thermoelectrics, ECT 2011. p. 187-190 4 p. (AIP Conference Proceedings; vol. 1449).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    Open Access
    1 Citation (Scopus)

  • Fabrication of thermoelectric modules with Mg2Si and SrRuO 3 by the spark plasma sintering method

    Nishio, K., Sawada, Y., Arai, K., Sakamoto, T., Kogo, Y. & Iida, T., 2012, 9th European Conference on Thermoelectrics, ECT 2011. p. 463-466 4 p. (AIP Conference Proceedings; vol. 1449).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Formation of Ni electrodes on sintered N-type Mg2Si using monobloc sintering and electroless plating methods

    Sakamoto, T., Sugiyama, K., Mori, D., Ogi, M., Nishio, K., Kogo, Y., Takanashi, Y. & Iida, T., 2012, 9th European Conference on Thermoelectrics, ECT 2011. p. 223-226 4 p. (AIP Conference Proceedings; vol. 1449).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    2 Citations (Scopus)

  • Statistical analysis of effect of polyamide veil layer on quality and mechanical property of VaRTM CFRP

    Yoshida, Y., Hirano, Y., Iwahori, Y. & Kogo, Y., 2012, ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials. European Conference on Composite Materials, ECCM, (ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • 2011

    Influence of processing conditions on mechanical and structural properties of DLC produced by FIB-CVD method

    Sakamoto, N., Akita, Y., Harada, H., Yasuno, T. & Kogo, Y., 2011, Deformation Mechanisms, Microstructure Evolution and Mechanical Properties of Nanoscale Materials. p. 137-142 6 p. (Materials Research Society Symposium Proceedings; vol. 1297).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    1 Citation (Scopus)

  • Size effect on bending properties of diamond-like carbon nanopillar fabricated by focused ion-beam assisted chemical vapor deposition

    Kogo, Y., Harada, H., Shibutani, Y., Sakamoto, N. & Yasuno, T., 2011, Deformation Mechanisms, Microstructure Evolution and Mechanical Properties of Nanoscale Materials. p. 149-154 6 p. (Materials Research Society Symposium Proceedings; vol. 1297).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • 2010

    Strength evaluation of C/C-composite screw joint structures

    Koyama, M., Suzuki, D., Kogo, Y., Fukuda, H. & Hatta, H., 2010, 25th Technical Conference of the American Society for Composites and 14th US-Japan Conference on Composite Materials 2010. p. 940-947 8 p. (25th Technical Conference of the American Society for Composites and 14th US-Japan Conference on Composite Materials 2010; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • 2009

    Direct evaluation of fracture toughness in a carbon fiber

    Ogihara, S., Imafuku, Y., Yamamoto, R. & Kogo, Y., 1 Jan 2009, ICCM-17 - 17th International Conference on Composite Materials. International Committee on Composite Materials, (ICCM International Conferences on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    9 Citations (Scopus)
  • 2008

    Tensile strength and creep behavior of Carbon-Carbon composites at elevated temperatures

    Goto, K., Hatta, H. & Kogo, Y., 2008, Design, Manufacturing and Applications of Composites: Proceedings of the 7th Joint Canada-Japan Workshop on Composites. p. 179 1 p. (Design, Manufacturing and Applications of Composites: Proceedings of the 7th Joint Canada-Japan Workshop on Composites).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • 2007

    Prevention of gas leakage through C/C composite

    Nagai, H., Hatta, H., Goto, K. & Kogo, Y., 2007, Proceedings of the 16th International Conference on Composite Materials, ICCM-16 - "A Giant Step Towards Environmental Awareness: From Green Composites to Aerospace". International Committee on Composite Materials, (ICCM International Conferences on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    1 Citation (Scopus)

  • Prevention of gas leakage through C/C composite

    Nagai, H., Hatta, H., Goto, K. & Kogo, Y., 1 Dec 2007, Proceedings of the 16th International Conference on Composite Materials, ICCM-16 - "A Giant Step Towards Environmental Awareness: From Green Composites to Aerospace". (ICCM International Conferences on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Tensile strength and creep behavior of carbon-carbon composites at elevated temperatures

    Goto, K., Ohkita, H., Hatta, H., Iseki, H. & Kogo, Y., 1 Dec 2007, Proceedings of the 16th International Conference on Composite Materials, ICCM-16 - "A Giant Step Towards Environmental Awareness: From Green Composites to Aerospace". (ICCM International Conferences on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Tensile strength and creep behavior of carbon-carbon composites at elevated temperatures

    Goto, K., Ohkita, H., Hatta, H., Iseki, H. & Kogo, Y., 2007, Proceedings of the 16th International Conference on Composite Materials, ICCM-16 - "A Giant Step Towards Environmental Awareness: From Green Composites to Aerospace". International Committee on Composite Materials, (ICCM International Conferences on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    8 Citations (Scopus)

  • Tensile strength of C/C composites

    Koyanagi, J., Hatta, H., Kogo, Y. & Shiota, I., 2007, Proceedings of the 16th International Conference on Composite Materials, ICCM-16 - "A Giant Step Towards Environmental Awareness: From Green Composites to Aerospace". International Committee on Composite Materials, (ICCM International Conferences on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Tensile strength of C/C composites

    Koyanagi, J., Hatta, H., Kogo, Y. & Shiota, I., 1 Dec 2007, Proceedings of the 16th International Conference on Composite Materials, ICCM-16 - "A Giant Step Towards Environmental Awareness: From Green Composites to Aerospace". (ICCM International Conferences on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Tensile strength of C/C composites

    Koyanagi, J., Hiroshi, H., Kogo, Y. & Shiota, I., 2007, Proceedings of the SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2007. p. 756-762 7 p. (Proceedings of the SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2007; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • 2001

    Measurement of adhesive force between mold and photo-curable resin in imprint technology

    Taniguchi, J., Kawasaki, T., Tokano, Y., Kogo, Y., Miyamoto, I., Komuro, M., Hiroshima, H., Sakai, N. & Tada, K., 2001, 2001 International Microprocesses and Nanotechnology Conference, MNC 2001. Institute of Electrical and Electronics Engineers Inc., p. 300-301 2 p. 984208. (2001 International Microprocesses and Nanotechnology Conference, MNC 2001).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • 1992

    Application of MMC as microwave packaging

    Okumura, M., Kogo, Y., Ito, T., Yoshizaki, K., Yamashita, H. & Fujiwara, T., 1992, International SAMPE Electronics Conference. Vol. 6. p. 285-294 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    5 Citations (Scopus)